We recommend you have your wheels mounted by a professional who is experienced in mounting aftermarket wheels and/or tires. If you need assistance in selecting a dealer, please call us and we will be happy to help you locate a professional installer in your area (800) 734-4890. Prior to the tire being mounted on the wheel, the wheel must be checked on the vehicle for proper clearance. To check proper fitment, wheel should fit on the vehicle without force. Warranty/return is voided if wheel is mounted on any tire without prior knowledge and consent from Wheel Pros. The tire manufacturer’s rim width recommendations must be followed for the proper tire and wheel combination. Check for proper fender, brake and suspension clearance. Improper tire mounting, fitting or wheel installation is not safe for you or your vehicle, for it may result in improper tire wear, failure of the tire to properly hold air, or explosion of the tire upon filling with air resulting in serious bodily injury and/or property damage. It is not mandatory that you use lug nuts supplied by Wheel Pros, but we recommend it. Torque specifications are set with the expectation that the lugs and studs will be free of dirt, grit or corrosion, so the lug turns freely on the stud. When first installing your wheels, we recommend starting your lug nuts by hand, snugging them on manually. We do not recommend using impact guns when installing wheels as cross-threading, over-tightening and/or damage may occur to your vehicle. When rechecking torque value, wait for the wheels to cool to ambient temperature (never torque a hot wheel). On all installations, proper torque specifications must be used. Your installer can contact us to order an approved kit and you must return to the installer after 10 miles and check and re-torque your lugs to ensure proper installation. Failure to do so is extremely unsafe and could cause an accident resulting in serious injury.